Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!sdsu!ncr-sd!palomar!dougm From: dougm@palomar.SanDiego.NCR.COM (Doug Marshall) Newsgroups: comp.sys.ibm.pc Subject: Re: HELP! Mitsubishi HD dead ?!? Message-ID: <2333@ncr-sd.SanDiego.NCR.COM> Date: 10 Jan 90 20:04:35 GMT Sender: news@ncr-sd.SanDiego.NCR.COM Reply-To: dougm@palomar.SanDiego.NCR.COM (Doug Marshall) Organization: NCR Corporation, Rancho Bernardo, CA Lines: 77 Apologies for posting rather than e-mailing. I've included the entire file that came back to me when I tried to 'R'eply to you directly. ****************************** CUT HERE ************************************* From ncr-sd!ncrlnk!relay.cs.net!tut.fi!MAILER-DAEMON Wed Jan 10 03:55 pdt 1990 Received: from relay.cs.net by ncrlnk.Dayton.NCR.COM ; Wed, 10 Jan 90 06:42:32 -0500 Received: from [128.214.1.2] by RELAY.CS.NET id aa26200; 9 Jan 90 22:29 EST Received: by tut.fi; id AB14303; Wed, 10 Jan 90 05:29:34 +0200 Date: Wed, 10 Jan 90 05:29:34 +0200 From: Mail Delivery Subsystem Subject: Returned mail: Service unavailable Message-Id: <9001100329.AB14303@tut.fi> To: dougm@palomar.sandiego.ncr.com MMDF-Warning: Parse error in original version of preceding line at RELAY.CS.NET ----- Transcript of session follows ----- Connected to [128.214.1.1]: >>> RCPT To: <<< 554 ... Host kannel not known 554 ... Service unavailable ----- Unsent message follows ----- Received: from mcsun.EU.net ([192.16.202.1]) by tut.fi; id AA14301; Wed, 10 Jan 90 05:29:34 +0200 Received: by mcsun.EU.net via EUnet; Wed, 10 Jan 90 04:29:27 +0100 (MET) Received: from cs.utexas.edu by uunet.uu.net (5.61/1.14) with UUCP id AA22639; Tue, 9 Jan 90 22:25:59 -0500 Posted-Date: Tue, 9 Jan 90 19:05:14 pst Received: from swrinde.nde.swri.edu by cs.utexas.edu (5.59/1.46) id AA23850; Tue, 9 Jan 90 21:21:36 CST Received: from ucsd.edu by swrinde.nde.swri.edu (5.61/1.34) id AA12684; Tue, 9 Jan 90 21:21:30 -0600 Received: from ucsdhub.UUCP by ucsd.edu; id AA24207 sendmail 5.61/UCSD-2.0-sun via UUCP Tue, 9 Jan 90 19:21:21 -0800 for cs.utexas.edu!uunet!mcsun!sunic!tut!kannel!huopio@swrinde.nde.swri.edu Received: by hp-sdd.sdd.hp.com; Tue, 9 Jan 90 19:05:14 pst Date: Tue, 9 Jan 90 19:05:14 pst From: dougm@palomar.SanDiego.NCR.COM Message-Id: <9001100305.AA22625@hp-sdd.sdd.hp.com> Received: from ncr-sd with uucp; Tue, 9 Jan 90 18:53 PST To: kannel!huopio@tut.uucp Subject: Re: HELP! Mitsubishi HD dead ?!? Newsgroups: comp.sys.ibm.pc In-Reply-To: Organization: NCR Corporation, Rancho Bernardo, CA Cc: In article you write: >Mu friend bought a BEAR 386 with a Mitsinbishi MR535-U00 drive and >DTC RLL 1:1 controller.. > >Now: Are these settings right for the drive? > >Cylinders 980 Heads 5 Precomp 0 Landing zone 981 Sect/trk 26 > I don't think so. I have the same drive and the CMOS BIOS reports that I have it defined as having 977 cylinders, 5 heads, Precomp 300, Landing zone 978 and 17 sectors per track. I did not low level format the drive myself. It was done by the technician where I bought it. I also have the same controller as your friend. I'm running my controller/drive in a 12MHz '286. I am also using RLL 1:1 as is your friend. Hope this helps. Cheers! -- Doug -- ---- Doug Marshall * My humble opinions and +1 619 485 3494 <...!ncr-sd!palomar!dougm> * and ideas are just that. "All of us is smarter than each of us!" ---- Doug Marshall * My humble opinions and +1 619 485 3494 <...!ncr-sd!palomar!dougm> * and ideas are just that. "All of us is smarter than each of us!"