Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!hodgenet!georgemartin
From: georgemartin@hodgenet.UUCP (George H. Martin)
Newsgroups: comp.sys.ibm.pc
Subject: Re: HELP: MultiUser Software (NTNX?)
Message-ID: <222@hodgenet.UUCP>
Date: 11 Jan 90 03:09:47 GMT
References: <676@sppy00.UUCP>
Reply-To: georgemartin@hodgenet.UUCP (George H. Martin)
Organization: Homer Dodge Network Systems, Inc.
Lines: 18

In article <676@sppy00.UUCP> sed@sppy00.UUCP (Steve Driscoll) writes:
>A friend of mine need some advice on MultiUser software.  A sales-type is
>recommending a product called NTNX.  He is running a Clipper application

While I can't answer your questions without knowing what his hardware 
configuration is, I can suggest that you call the vendor and ask them directly.
The name and such are:

		Alloy Computer Products, Inc.
		Marlboro, Mass.
		+1 800 544 7551 (Sales)
		+1 508 481 8200 (Technical Support)

-- 
George H. Martin
uunet!hodgenet!georgemartin
Homer Dodge Network Systems, Inc.
+1 201 454 3333