Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!cs.utexas.edu!sun-barr!newstop!texsun!texbell!uudell!bigtex!pmafire!geoff
From: geoff@pmafire.UUCP (Geoff Allen)
Newsgroups: comp.sys.mac
Subject: Re: Alternatives to FTP  (A slight correction)
Keywords: FTP software listserver rice
Message-ID: <1045@pmafire.UUCP>
Date: 8 Jan 90 17:35:46 GMT
References: <1040@pmafire.UUCP>
Reply-To: geoff@pmafire.UUCP (Geoff Allen)
Organization: WINCO Computer Engineering, INEL, Idaho
Lines: 29

I wrote:
>Use the listserver at Rice.  It mirrors the archive at Sumex, but is
>about a week behind.  You can reach it at
>
>LISTSERV@ricevml.rice.edu (or uunet!ricevml.rice.edu!LISTSERV)
>
>(Actually, the address I was given in the e-mailed advice was
>uunet!isca.rice.edu!LISTSERV, and that's what I used, but the return
>address on the messages from the listserver was
>ricevml.rice.edu!LISTSERV)

Unfortunately, when I typed the above, I was looking at a printed copy
of the mail I'd gotten from the listserver, and the printer made no
distinction between 1 (`one') and l (lower case `L').  It looked like an
`ell' to me, and that's what I typed.

I was wrong, however.  It should be a 1 (one).  So the correct address is:

LISTSERV@ricevm1.rice.edu  <or>  ricevm1.rice.edu!LISTSERV

Sorry for any confusion that may have caused anyone who tried the
address I typed.

Geoff

-- 
Geoff Allen                  \  WINCO doesn't believe in Macs, 
{uunet|bigtex}!pmafire!geoff  \  so of course these are my views.
ucdavis!egg-id!pmafire!geoff   \