Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!tut.cis.ohio-state.edu!pt.cs.cmu.edu!andrew.cmu.edu!dh07+
From: dh07+@andrew.cmu.edu (David Hairston)
Newsgroups: comp.sys.mac
Subject: Re: Re: Problem with SuperClock 3.8
Message-ID: <QZeVWaW00WB8QJ7Us8@andrew.cmu.edu>
Date: 9 Jan 90 17:00:22 GMT
Organization: Electrical and Comp. Engineering, Carnegie Mellon, Pittsburgh, PA
Lines: 19

[dh07+@andrew.cmu.edu (David Hairston, me!) writes:]
>[carmi@mars.jpl.nasa.gov (Aviram Carmi) follows up:]
>>[jem@sm.luth.se+ writes:]
>>>I've got some problem using SuperClock 3.8 on my SE/30. During startup
>>.
>>I have the same problem on a MacII/6.0.2. I went back to version 3.6.
>.
>SuperClock 3.8 works fine on my mac II running system 6.0.2. the key
>here is that it has been renamed <spc>SuperClock to run after Vaccine
>(named <spc><spc>Vaccine) and before my other 20 or so inits.
.
Actually, as reported by someone else, there is still a problem if you
try to launch MultiFinder after the boot sequence. The machine crashes
with SuperClock 3.8 and doesn't without it. This didn't happen with v3.6.
You can run MultiFinder as the startup application with no problem
using v3.8.

  -dave-
hairston@henry.ece.cmu.edu