Path: utzoo!attcan!uunet!fernwood!decwrl!wuarchive!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxe.cso.uiuc.edu!jacobson
From: jacobson@uxe.cso.uiuc.edu
Newsgroups: comp.sys.mac.hardware
Subject: Re: what TORQX is needed to open a Mac
Message-ID: <112800004@uxe.cso.uiuc.edu>
Date: 12 Jan 90 10:38:27 GMT
References: <2816@cerberus.oakhill.UUCP>
Lines: 19
Nf-ID: #R:cerberus.oakhill.UUCP:2816:uxe.cso.uiuc.edu:112800004:000:839
Nf-From: uxe.cso.uiuc.edu!jacobson    Jan 11 18:22:00 1990


The following comment in the above reply brings up a question:
 
    "P.S.  Don't forget to clip/remove the 150 ohm "256K RAM" resistor if you're
      adding 1 Mb SIMMS.

On my SE/30 I am thinking of adding some 1 MEG simms now that the price is
so low. Besides putting the 1 MEG simms in bank A (I am planning on adding
4 megs) and moving the 1 MEG of 256k simms to bank B is there anything like
this resistor to change or does moving the ram around in the banks do all
that is necessary. When open this machine I don't want to have to do it
twice given how cramped it will likely be. Also with the SE/30 are there
any other things I should know? Is there any documentation available on
adding ram to the SE/30 like I have seen for the regular SE? Thanks much!

Russ Jacobson
Illinois Geological Survey
Champaign, IL 61820
217-244-2425