Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!mips!abbott.mips.com!steveh From: steveh@abbott.mips.com (Stephen C. Hill) Newsgroups: comp.sys.mips Subject: Re: M/120 PC/AT peripherals Keywords: M/120 PC/AT ethernet dma Message-ID: <34135@mips.mips.COM> Date: 4 Jan 90 19:51:13 GMT References: <33691@mips.mips.COM> <10241@alice.UUCP> Sender: news@mips.COM Lines: 27 In article <33691@mips.mips.COM>, rogerk@mips.COM (Roger B.A. Klorese) writes: > > In article <10241@alice.UUCP> jmk@alice.UUCP (Jim McKie) writes: > > > >has anyone attached any interesting peripherals > >using dma to the PC/AT bus on the M/120? i've > >only added some dumb boards. > >i'm particulary interested in being able to add > >extra ethernet controllers. > > Mips' Integration Products Group is shipping an Ethernet card and driver for > the AT slots, though I'm not sure if the driver is DMA. (I'll check.) > Check with your sales office for details. > Our Ethernet offering does NOT use DMA, but uses shared memory. As Roger says, "Check with your sales office for details." Steve -- Stephen C. Hill, CDP Software Engineer {ames,prls,pyramid,decwrl}!mips!steveh or steveh@mips.com Integration Products GROUP, MIPS Computer Systems, 930 Arques, Sunnyvale, CA 94086, (408) 720-2916 Time is Nature's method of keeping us from bumping into ourselves. #include