Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!uakari.primate.wisc.edu!caesar.cs.montana.edu!ogicse!decwrl!ucbvax!AERO4.LARC.NASA.GOV!blbates
From: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS294 x42854")
Newsgroups: comp.sys.sgi
Subject: Re:  A Question about SIMMS for IRIS 4D/25
Message-ID: <9001051539.AA13873@aero4.larc.nasa.gov>
Date: 5 Jan 90 12:39:10 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 14


    I have been told that the 4D/20 and 4D/25 use the same memory.
However, if you want 32Mb of memory on the main board you have to use
4Mb SIMMS, ALL of them must be the same.  So, if you currently have
1Mb SIMMS, you will have to remove them and replace them with the
4Mb SIMMS.
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 294
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov