Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!lll-winken!decwrl!decatl!karsten
From: karsten@decatl.dec.com (Jim Karsten)
Newsgroups: comp.sys.tandy
Subject: Re: Tandy 1000SL VGA Music Help
Keywords: 1000SL
Message-ID: <1990Jan11.211255.27850@decatl.dec.com>
Date: 11 Jan 90 21:12:55 GMT
References: <482@gvlv2.GVL.Unisys.COM> <484@gvlv2.GVL.Unisys.COM>
Reply-To: karsten@decatl.alf.dec.com.UUCP (Jim Karsten)
Distribution: usa
Organization: Digital Equipment Corporation, Alpharetta, GA
Lines: 28

In article <484@gvlv2.GVL.Unisys.COM> ean@gvlv3.gvl.unisys.com (Ed Naratil) writes:
>
>Re: Message-ID: <482@gvlv2.GVL.Unisys.COM>
>
>Additional information -  The Tandy 1000SL has 640KB of memory
>installed and the Tandy SETUPSL video memory allocation is as
>low as it can be set since the VGA board has its own memory.
>
>Of all the software that I have, that has sound/music, DeskMate
>MUSIC.PGM is the only one that doesn't work and hangs the system.
>
>Ed             ean@gvlv3.gvl.unisys.com

    I have a Tandy 1000TL/2 with 640kb of memory and  I found out 
that if you have a printer hook to the parallel port you must have
the printer turn on (power that is ) but you don't need it on line.
I have not yet got the technical doc set form Tandy for the 1000TL
So I am not able to say you need the printer powered on.

 Hope this helps



-- 
Jim Karsten
Digital Equipment Corporation
Karsten@decatl.alf.dec.com or Karsten@decatl.dec.com or Karsten%decatl@decwrl.dec.com
"Disclaimer, Opinions expressed here are mine and not those of my