Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!virtech!cpcahil
From: cpcahil@virtech.uucp (Conor P. Cahill)
Newsgroups: comp.unix.i386
Subject: Re: Need some Help with MegaPort for ISC
Message-ID: <1990Jan4.121607.16726@virtech.uucp>
Date: 4 Jan 90 12:16:07 GMT
References: <9001040323.AA27970@decwrl.dec.com>
Organization: Virtual Technologies Inc.
Lines: 22

In article <9001040323.AA27970@decwrl.dec.com>, paine@fungus.dec.com (Willy Paine) writes:
> After building kernel and rebooting, I am getting:
> Megaport Board ICP=80EB000, MEM=80E8000, vec=0 not found [ECH]

I had the same exact problem on an AMI 33MHZ system.  I took out every other
board in the system (other than basic monochrome display and a disk adapter)
and the problem did not go away.  I configured the card into 3 different
locations (2 > 1M and 1 < 1M) and still came up with the same results.  I took
the card and placed it into another machine and it configured fine.  I then
took the disk drive, controller and display adapter from the second machine
and put them into the first machine and the card would not configure.

I have gotten a second card and have not yet had a chance to try it out. I
should get to try it tonight or else some time this weekend.



-- 
+-----------------------------------------------------------------------+
| Conor P. Cahill     uunet!virtech!cpcahil      	703-430-9247	!
| Virtual Technologies Inc.,    P. O. Box 876,   Sterling, VA 22170     |
+-----------------------------------------------------------------------+