Path: utzoo!attcan!uunet!aplcen!samsung!zaphod.mps.ohio-state.edu!usc!snorkelwacker!bloom-beacon!bu.edu!bu-cs!dartvax!lsmi!robbc
From: robbc@lsmi.UUCP (Robb Cutler)
Newsgroups: comp.unix.xenix
Subject: Terminal locking up
Message-ID: <33@lsmi.UUCP>
Date: 12 Jan 90 13:31:14 GMT
Distribution: na
Organization: Life Sciences Manufacturing, Inc.
Lines: 25

I ran into the following problem yesterday:

I'm running SCO Xenix 2.3.2 on a 386 with 3 Arnet Smartport boards.
One tty (on the Arnet board) locked up and I needed to shutdown and
reboot to get it to work again.

I tried unplugging and replugging in the port, shutting off and repowering
the terminal (a DEC VT100) connected to port, sending X-ON characters from
the terminal, and finally tried to kill the getty process on the device.

Nothing worked and the kill -9 would not start a new getty process.

The port locked up after automatically logging off the user due to too
much idle time.

If anyone has any suggestions or has run across a similar situation, I'd
appreciate it -- I'd hate to have to shutdown each time it happens.

Thanks in advance,
Robb
-- 
Robb Cutler                                    robbc@lsmi.com
Quality Assurance Manager                      ...!dartvax!lsmi!robbc
Life Sciences Manufacturing, Inc.
West Lebanon, NH  03784                        (603) 298-8010