Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!psuvax1!psuvm!USU!JRD From: JRD@USU.BITNET (Joe Doupnik) Newsgroups: bit.listserv.novell Subject: RE: RE Zenith 386/16 and EMS Message-ID: Date: 5 Feb 90 17:56:00 GMT Sender: Novell LAN Interest Group Reply-To: Novell LAN Interest Group Lines: 18 Approved: NETNEWS@PSUVM Gateway X-VMS-To: IN%"NOVELL@SUVM.BITNET" Zenith 386's w/extra memory. There have been a number of messages on this topic so I hope Zenith users have been keeping notes. A common thread is comms trouble when one version or another of Zenith's emm.sys program is operated. I would expect similar/worse trouble when 16 bit VGA boards are used in 16 bit mode. Some network boards use shareable memory, and of those some allow the memory address to be placed in segment E000h. That segment is normally free on 386 machines but not free on regular ATs. Thus, the network board can be moved up there in many cases. 16bit VGA boards are also memory hogs and the best solution seems to be tell them to use 8-bit mode; there is little loss of performance and a huge loss of system conflicts. Quarterdeck's expanded memory manager, QEMM, lets the user divide up the space needed for expanded memory tables to hop over network boards and similar. Norton's System Index is a handy way of discovering free space and probably conflicts, without becoming a guru. Joe D.