Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!lll-winken!sun-barr!newstop!sun!quintus!pds
From: pds@quintus.UUCP (Peter Schachte)
Newsgroups: comp.sys.amiga
Subject: Re: RAD: and reboot
Message-ID: <1319@quintus.UUCP>
Date: 2 Feb 90 23:41:06 GMT
References: <1700008@hpgnd.HP.COM>
Reply-To: pds@quintus.UUCP (Peter Schachte)
Organization: Quintus Computer Systems, Inc.
Lines: 18

In article <1700008@hpgnd.HP.COM> olivier@hpgnd.HP.COM (Olivier BORDES) writes:
>Autoboot from RAD:
>The final answer is:
>  You MUST use the COMMODORE MOUNT command and NOT
>  the ARP command.

I've been autobooting from RAD: mounted with ARP mount with no problems.
No problems, that is, once I added BootPri = 0, as someone here
suggested.  I go from 3-finger salute to completed boot in under 30
seconds.  I also got my RAD: down to about 40-50K by removing almost
everything.  I'll post a list of what's in my RAD if anyone's
interested.

This is on an A1000 with Escort hard disk and a 1M Insider.
-- 
-Peter Schachte
pds@quintus.uucp
...!sun!quintus!pds