Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!usc!ucsd!ucsdhub!hp-sdd!hplabs!hp-ses!hpbbn!hpgnd!olivier
From: olivier@hpgnd.HP.COM (Olivier BORDES)
Newsgroups: comp.sys.amiga
Subject: Re: Re: CAD for amiga - reply
Message-ID: <1700009@hpgnd.HP.COM>
Date: 1 Feb 90 12:04:11 GMT
References: <1033@mindlink.UUCP>
Organization: Hewlett-Packard, GND
Lines: 12

There is also a very good shareware
called "Plans" (found on a CUCUG disk 022 or 
023, I don't remember). 
It is a very powerfull 2D CAD program.
I tried it with an HP plotter, and the
result was Ok.

Hard to learn, but really very
powerfull. Try it !

Olivier Bordes
olivier@hpgnd.hp.com