Path: utzoo!utgpu!jarvis.csri.toronto.edu!torsqnt!hybrid!becker!bdb From: bdb@becker.UUCP (Bruce Becker) Newsgroups: comp.sys.amiga Subject: Re: Nec3d or Sony cd-1304 (2)? Message-ID: <3451@becker.UUCP> Date: 5 Feb 90 05:30:05 GMT References: <9735@baldrick.udel.EDU> Reply-To: bdb@becker.UUCP (Bruce Becker) Organization: G. T. S., Toronto, Ontario Lines: 21 In article liberato@drivax.UUCP (Jimmy Liberato) writes: |[...] |A warning to everyone buying multisync monitors. Some of the newer |ones that allow the higher "super VGA" resolutions sacrifice the now |obsolete CGA resolution. The Amiga uses that very same 15.75MHz |scan rate (although analog instead). Case in point is the above |CDP-1304. It will only work with a flickerFixer (or equivalent) |at 31.5MHZ on an Amiga. The CDP-1302 will scan down to 15.75MHz. You need to make sure the monitor works well in interlace mode without a flicker-fixer. Many multi-syncs will put the odd and even frames on top of each other on the display and you end up with an effectively non- interlaced image. -- (__) Bruce Becker Toronto, Ont. w \@@/ Internet: bdb@becker.UUCP, bruce@gpu.utcs.toronto.edu `/v/-e BitNet: BECKER@HUMBER.BITNET _/ \_ Well I didn't want to mention it cause it's so silly, but you know how