Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!mailrus!cornell!uw-beaver!ssc-vax!shuksan!tahoma!prl3546
From: prl3546@tahoma.UUCP (Philip R. Lindberg)
Newsgroups: comp.sys.apple
Subject: Re: Volunteer
Message-ID: <928@tahoma.UUCP>
Date: 30 Jan 90 16:17:00 GMT
References: <55211@srcsip.UUCP>
Organization: The Boeing Co., BCA FSL, Seattle, WA
Lines: 23

From article <55211@srcsip.UUCP>, by shankar@SRC.Honeywell.COM (Subash Shankar):
> In article <24999@gryphon.COM> lbotez@pnet02.gryphon.com (Lynda Botez) writes:
>>
>>I will be GLAD to forward ALL comments from this feed to Jerry Cline.  
> 
> Ok, here goes.  [ more speed, etc....]
> 
>   a built-in SCSI port is absolutely required.
 
A lot of people have put in the "SCSI port required", but so far as I have
seen, nobody has pointed out that it needs to have both an internal and an
external plug/connector.  This is required since the machine needs to
support internal hard drives as well as external devices.  (IMHO)

Phil

+--------------------------------------------------------------+
|If my IIgs 'll just hold out for a few more months 'til GS+...|
| Phil Lindberg	      		 snail mail: 13845 S.E. 131 ST |
| UUCP: ..!uunet!bcstec!tahoma!prl3546       Renton, WA 98056  |
|    Disclaimer: I don't speak for my employer (and I not      |
|		 sure they even know I exist....)	       |
+--------------------------------------------------------------+