Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!rutgers!rochester!rit!ultb!lmb7421
From: lmb7421@ultb.isc.rit.edu (Les Barstow: Phoenix)
Newsgroups: comp.sys.apple
Subject: ProDOS HyperC
Keywords: source, location, uploads, FTP
Message-ID: <2084@ultb.isc.rit.edu>
Date: 2 Feb 90 17:10:41 GMT
Reply-To: lmb7421@ultb.isc.rit.edu (Les Barstow: Phoenix)
Organization: Wandering Damage, Cosmo Police, Psi division
Lines: 21

Someone posted having the ProDOS HyperC and source code...
Does anyone out there have the ability to put it on APPLE2-L or any of
the FTP sites out there for public consumption?  A public-domain C
compiler, even if it is 8-bit, would be handy to say the least.
It would also make a PD gs C compiler that much easier to write...

Also, could anyone out there get me info on programming the serial port
for interrupt-driven reads and writes? ie, what are the calls for
reading and writing to the serial port which don't access the firmware
so I don't have to screen out CRTL-A/CTRL-I, both of which I use
frequently...  I need it for my VT220 program, and haven't been able to
afford new reference books lately.  Also, some clue as to how to
correctly program the interrupt driver using the toolbox routines...
The GS Technical Reference is vague at best (not Apple's, the
independent one...), and I don't have the Firmware Reference or the
Hardware Reference.  Please, Help!?
-- 
Les Barstow      |RIT - A citadel of gleaming brick towering over a snowy swamp
SunSinger        |Money - That which pays the bills.  A dream never remembered.
Phoenix rising...+-------------------------------------------------------------
LMB7421@ritvax.bitnet | lmb7421@ultb.isc.rit.edu |...rochester!rit!ultb!lmb7421