Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!husc6!m2c!wpi!greyelf
From: greyelf@wpi.wpi.edu (Michael J Pender)
Newsgroups: comp.sys.apple
Subject: Re: HyperC
Message-ID: <7734@wpi.wpi.edu>
Date: 6 Feb 90 02:32:33 GMT
References: <9002051837.AA12046@en.ecn.purdue.edu>
Reply-To: greyelf@wpi.wpi.edu (Michael J Pender)
Organization: Worcester Polytechnic Institute, Worcester ,MA
Lines: 20

In article <9002051837.AA12046@en.ecn.purdue.edu> eldorado@EN.ECN.PURDUE.EDU (David D Jansen) writes:
>Keywords: HyperC
>
>Small mistake.  The Prodos version is not at husc6.harvard.edu so upload the
>Prodos version to comp.binaries.apple2 please.  I thought what you meant by
>Prodos version is that it could run compiled stuff in prodos.  I was also
>wondering how to load the disk to a ram disk since it did so (too) much
>disk access.  Since the manual is about $35, does anyone want to split the
>cost, maybe 35 ways and get a posted copy to the net?

My understanding was that the company had gone bust, and that the
program, sources, and related info had gone back to the authors.

In other words, I don't think there's a company left to send you a
copy of the instructions...

---
Michael J Pender Jr  Box 1942 c/o W.P.I. W.O.S. is not dead.
greyelf@wpi.bitnet   100 Institute Rd.   ...its time to get started,
greyelf@wpi.wpi.edu  Worcester, Ma 01609 there is much to be done.