Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!amdcad!pepsi!phil
From: phil@pepsi.amd.com (Phil Ngai)
Newsgroups: comp.sys.ibm.pc
Subject: Re: 704Kb for DOS
Keywords: 704Kb Memory Board
Message-ID: <29015@amdcad.AMD.COM>
Date: 1 Feb 90 01:23:18 GMT
References: <6603@ubc-cs.UUCP>
Sender: news@amdcad.AMD.COM
Reply-To: phil@pepsi.AMD.COM (Phil Ngai)
Organization: Advanced Micro Devices, Inc. Sunnyvale CA
Lines: 18

In article <6603@ubc-cs.UUCP> jalbert@cs.ubc.ca (Francois Jalbert) writes:
|Hello everybody. About one month ago, I mentioned my desire to add 64Kb
|to my standard 640Kb on my AT. This is possible since I am using mono
|and CGA video adapters only (No EGA, VGA, or MCGA). I have been running
|such a setup on my PC for 5 or 6 years now. It is time to report my
|findings.

I think if you had a real EMS 4.0 card it would be a piece of cake.
Software like DESQview and the new Above Disc stuff (not to be confused
with Intel's products) should be able to do it for you.

You might also check out RIBS, +1 303 444 6073.

It's not as cheap as you wanted but it's a lot more general.

--
Phil Ngai, phil@diablo.amd.com		{uunet,decwrl,ucbvax}!amdcad!phil
It's a boy!