Xref: utzoo comp.protocols.tcp-ip.ibmpc:2341 comp.sys.ibm.pc:43467
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!samsung!emory!hubcap!ncrcae!secola!syackey
From: syackey@secola.Columbia.NCR.COM (Steve Yackey)
Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.sys.ibm.pc
Subject: Re: Novell's ECONFIG
Keywords: Novell ECONFIG
Message-ID: <480@secola.Columbia.NCR.COM>
Date: 2 Feb 90 20:01:28 GMT
References: <2820@xyzzy.UUCP>
Reply-To: syackey@secola.UUCP (Steve Yackey)
Distribution: usa
Organization: NCR Comten Columbia
Lines: 11

In article <2820@xyzzy.UUCP> cohend@dg-rtp.dg.com (Dave Cohen) writes:
>I'm not sure if these are the appropriate groups to post this to...
>
>to use Ethernet with typefield set to 8137 causes my
>file server to hang when I try to attach from the workstation. I can
>go back to IEEE 802.3 type and everything works fine. I'm using
>3c503 boards in both workstation and file server.

We have found that 3c503 cards do not work as an "internal bridge" or
when econfig'ed. Novell does not support these cards. You'll have to
not econfig, or use another controller - ne200 works ok.