Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!purdue!decwrl!shelby!agate!saturn!helios!ted
From: ted@helios.ucsc.edu (Ted Cantrall)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Help, PC starts too slow
Message-ID: <10644@saturn.ucsc.edu>
Date: 5 Feb 90 15:33:29 GMT
References: <1625@lakesys.lakesys.com>
Sender: usenet@saturn.ucsc.edu
Reply-To: ted@helios.ucsc.edu (Ted Cantrall)
Organization: UCO/Lick Observatory, Santa Cruz
Lines: 14

In article <1625@lakesys.lakesys.com> cperry@lakesys.UUCP (Christopher Perry) writes:
>
>My 12 mhz AT 80286 clone is supposed to start at 6 mhz.  Instead when
>I turn it on often it starts at 1.3 mhz.  Then I turn it off and
>turn it back on about 30 seconds later at it starts at the
>correct 6 mhz
We have had 1Mz xtals that would occationally start a .1Mz. The remedy
is to replace the beasty.		-ted-


-------------------------------------------------------------------------------
ted@helios.ucsc.edu         | "The opinions are mine...
(408)459-2110               |    ...the facts are public domain."
-------------------------------------------------------------------------------