Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: advsys!brian%relay.EU.net@ricevm1.rice.edu (Brian Rippon)
Newsgroups: comp.sys.sun
Subject: Re: Need GPIB on SS1
Message-ID: <4475@brazos.Rice.edu>
Date: 28 Jan 90 06:00:00 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 37
Keywords: Hardware
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n8
X-Sun-Spots-Digest: Volume 9, Issue 14, message 2 of 14

In article <4281@brazos.Rice.edu> you write:
>X-Sun-Spots-Digest: Volume 9, Issue 8, message 8 of 14
>
>Does anyone know of a GPIB board that will work on a Sparcstation 1?

Sun(UK?) published a list (December 8th 1989) of SBus cards available/
under development. Under IEEE488 they list:

IOtech			SBus-IEEE488 controller
Dan Lucarini
216-439-4091

National Instruments	GPIB interface
Tim Dehne
512-794-0100

I have no other knowledge of these products.

Other cards listed include:
	Parallel/serial I/O
	Bus adapters
	Frame buffers
	Co-processors
	Scanner i/f
	LAN/WAN
	SCSI controller
	Modems/fax modems
	A to D I/O
	Memory
	DMA controllers/extenders
	Interface boards

Does anyone have first-hand experience of any of these, especially
parallel/serial boards?

Brian.					brian@advent.co.uk
					...!ukc!pyrltd!advsys!brian