Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!wuarchive!texbell!merch!cpe!hal6000!trsvax!earl
From: earl@trsvax.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: How much memory on a 3000HD motherb
Message-ID: <193300195@trsvax>
Date: 2 Feb 90 21:44:00 GMT
References: <22@cs.psu.edu>
Lines: 39
Nf-ID: #R:cs.psu.edu:22:trsvax:193300195:000:1444
Nf-From: trsvax.UUCP!earl    Feb  2 15:44:00 1990


/* ---------- "How much memory on a 3000HD motherb" ---------- */

   Does anyone out there know how much memory I can put on the
motherboard of my Tandy 3000HD?  When I bought it, two of the 
four banks were filled with 256K chips.  Over the summer I upgraded
to 640K by adding 2 banks of 64K chips (at the suggestion of a
Radio Shack Computer Center employee who'd never even heard of a
3000HD).

Thanks in advance,
  Len Zaikoski (zaikoski@endor.cs.psu.edu)
"Imagination is the one weapon in the war against reality."
							- Jules De Gaultier

    *********************************************************************

    You can only put up to 640k on the motherboard. If you require more
    memory, you will have to utilize AT compatible memory expansion
    boards and use up I/O slots as needed. I know that the Everex, AST
    Rampage, and Tandy memory expansion boards all work fine in a Tandy
    3000 HD machine.


***********************************************************************


<This information is provided by an individual and is not nor should be
 construed  as  being  provided  by  Radio  Shack or Tandy Corp.  Radio
 Shack/Tandy Corp has no obligation to support the information provided
 in  any way. > 
						
						Earl W. Bollinger
						@ <trsvax!earl>


"You were in the Clone Wars!", said Luke excitedly.
"Yes", replied Obi Wan, "I was a DOS programmer. But that was before the dark
 times, before OS2."