Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!aplcen!samsung!brutus.cs.uiuc.edu!psuvax1!psuvm!OSHKOSHW!ATKINSON From: ATKINSON@OSHKOSHW.BITNET (Jene Atkinson, Jr.; UW Oshkosh) Newsgroups: bit.listserv.novell Subject: PRINTDEF Message-ID: Date: 9 Feb 90 17:14:00 GMT Sender: Novell LAN Interest Group Reply-To: Novell LAN Interest Group Lines: 24 Approved: NETNEWS@PSUVM Gateway Original_To: NOVELL Greetings all, I am having a slight difficulty with PRINTDEF, and I was hoping someone out there would be able to help me. All I've seen in the manuals for the function definitions, is to enter for escape, no where does it tell what to do with DC2, SO, and all the other non printer codes. I tried to put to get it reset back to 10cpi, but nothing happened, I changed it to : for 12cpi and it worked, so I have it setup correctly, just have the wrong code for 10cpi. The printer was being used while I was testing so I didn't test using DC2, yet. Will that do it or is there (or isn't there) another way. Thanks :-) Jene =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= Jene Atkinson, Jr. | c/o Computer Services | Phone : (414) 424 - 3028 University of Wisconsin - Oshkosh | Bitnet : ATKINSON@OSHKOSHW 800 Algoma Blvd. | Internet : ATKINSON@OSHKOSH.WISC.EDU Oshkosh, Wisconsin 54901 | =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=