Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!psuvax1!psuvm!RELAY!MGW From: mgw@RELAY.PROTEON.COM Newsgroups: bit.listserv.novell Subject: Re: syscon hanging Message-ID: <9002131534.AA09264@monk.proteon.com> Date: 13 Feb 90 15:25:00 GMT Sender: Novell LAN Interest Group Reply-To: Novell LAN Interest Group Organization: Proteon, Inc., Westborough, MA 01581 [(508)898-2800] Lines: 37 Approved: NETNEWS@PSUVM.BITNET Gateway Posted-Date: Tue, 13 Feb 90 10:29 EST X-Vers: CCMail to SMTP translator by Alan Marshall vers 2.24 8/30/89 X-To: novell@suvm.acs.syr.edu > An associate of mine here has just set up his first > Netware system (ANW 2.15c). An interesting problem has > arisen. In syscon the functions ACCT RESTRICTIONS and OTHER > INFO, and under the SUPERVISOR OPTIONS menu, options DEFAULT > ACCT BALANCE/RESTRIC. all semm to hang the workstation. After > the connection times out you get: Network Error: error > receiveing from network. Abort or Retry. If you retry same > result, if you abort you are logged out and sitting in the > Login directory. All other functions in Syson work ok. > ACCOUNTING has not been installed. > > Any and all suggestions welcome. > >> >> I have experienced very nearly the same problem within >> SYSCON, but in a different menu area. I get the same >> symptoms when I try to access the OTHER INFO item in USER >> INFORMATION. For me, it isn't consistent, and seems to be >> worst when I try to access info on a user who is on a server >> which I am only ATTACHed to, rather than on the server I'm >> logged into. >> >> I am using ANW 2.15C, and trying all of this as SUPERVISOR. >> >> Up until now I've just ignored it, although I would like >> to resolve the matter, especially if it is indicative of >> some more serious problem. This was experienced by us at Proteon Inc. as well, downgrading to the SYSCON supplied in 2.15 rev a solved it... Marc Washburn TS Engineer Proteon Inc. (508) 898-3100 mgw@relay.proteon.com