Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!TREARN.BITNET!SYSADM4
From: SYSADM4@TREARN.BITNET (Suleyman Nazif KUTLU)
Newsgroups: comp.lang.asm370
Subject: TRACE'ing output of a module to virtual printer....
Message-ID: <9002140047.AA24184@lilac.berkeley.edu>
Date: 14 Feb 90 00:49:32 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: IBM 370 Assembly Programming Discussion List <ASM370%UCF1VM.bitnet@lilac.berkeley.edu>
Distribution: inet
Organization: The Internet
Lines: 10
X-Unparsable-Date: Tue, 13 Feb 90 17:03:37 TUR


     Hi.  Is there anybody  who is able to TRACE a module  and route the output
of the CP TRACE command to the virtual printer ? Here, on VM/SP HPO Rel 5 Level
516, if i IPL  my machine with system name (CMS) and use  CP TRACE ALL PRINTER,
after finishing my  work (ending the trace (TRACE END)  and closing the printer
(CLOSE 00E)), I can not get the trace output in my print spool file.

     But if I  IPL with non-shared copy  of CMS (i.e.  IPL  190), everything is
ok.  Any help would be appreciated.                     -Suleyman Kutlu
                                                       System Programmer