Path: utzoo!attcan!uunet!lll-winken!uwm.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!tut.cis.ohio-state.edu!ucbvax!cell.mot.COM!motcid!ahlenius
From: motcid!ahlenius@cell.mot.COM (Mark Ahlenius)
Newsgroups: comp.laser-printers
Subject: printer comparison
Keywords: apple laserwriter NT, GCC
Message-ID: <9002072152.AA21299@crayola.cs.UMD.EDU>
Date: 24 Jan 90 13:57:43 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Motorola Inc. - Cellular Infrastructure Div., Arlington Heights, IL 60004
Lines: 31
Approved: laser-lovers@brillig.umd.edu


Does anyone have any experience in using both the
Apple Laser Write NT and the GCC laser printer?

I am interested in using them on an apple network,
and would like to find out more about the quality
and reliability of the GCC printer vs. the Apple.

I am familiar with using the apples and am very 
satisfied with their quality and reliability.  But
have no experience using the GCC.  I know from a 
review that I read that the GCC is at least a grand
less than the apple, and that you can connect a local
disk drive to it for both spooling and font storage -
something that the NT doesnt provide.  BUt the engine
on the GCC is only rated at 180,000 copies and the NT
comes in at 300,000.  

I have read the review from MacWorld - but wanted to
converse with someone who has actually used them
(GCC and NT) in a more industrial setting.

thanks in advance

	'mark

-- 
===============	regards   'mark  =============================================
Mark Ahlenius 		  voice:(708)-632-5346  email: uunet!motcid!ahleniusm
Motorola Inc.		  fax:  (708)-632-2413
Arlington, Hts. IL, USA	 60004