Path: utzoo!attcan!uunet!cs.utexas.edu!asuvax!mcdphx!mcdchg!ddsw1!corpane!sparks
From: sparks@corpane.UUCP (John Sparks)
Newsgroups: comp.sys.amiga
Subject: Re: Printer Cables
Message-ID: <1399@corpane.UUCP>
Date: 6 Feb 90 17:08:34 GMT
References: <21826@unix.cis.pitt.edu> <1352@corpane.UUCP> <904@uvicctr.UVic.CA.UUCP>
Organization: Corpane Industries, Inc., Louisville Ky
Lines: 18

teece@uvicctr.UVic.CA.UUCP (teece) writes:

>> ejkst@unix.cis.pitt.edu (Eric J. Kennedy) writes:

 >Seems to me, you would have to chop off the connector and replace it with a
 >female type. The A1000 parallel port uses a male connector and so does a 
 >standard IBM printer cable. So besides chopping out the wires with undesirable
 >voltages, you will also need a female end on the cable to mate with the A1000.


Ooops! sorry. Yep, I just use a gender changer, no rewiring necessary.



-- 
John Sparks  | D.I.S.K. 24hrs 1200bps. Accessable via Starlink (Louisville KY)
sparks@corpane.UUCP <><><><><><><><><><><> D.I.S.K. ph:502/968-5401 thru -5406 
Help fight continental drift.