Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!caesar.cs.montana.edu!ogicse!decwrl!shelby!portia!mmaston
From: mmaston@portia.Stanford.EDU (Michael Maston)
Newsgroups: comp.sys.amiga
Subject: Conner CP-340
Message-ID: <9064@portia.Stanford.EDU>
Date: 11 Feb 90 01:12:18 GMT
References: <7702@sun.acs.udel.edu> <26764@cup.portal.com> <22800@usc.edu> <19369@grebyn.com>
Sender: Michael Maston <mmaston@portia.stanford.edu>
Reply-To: mmaston@portia.Stanford.EDU (Michael Maston)
Organization: Stanford University
Lines: 17

OK guys, now that you have provided me with the specs on the CP-340, maybe
one of you could provide me with the uses of the 7 jumpers on the front 
(the end without the power and SCSI connector) of the drive.  I figured out
from trial and mostly error that there are four jumpers on the controller
board that set the SCSI address, but I have no idead what these others are.

I wouldn't care but the damn thing is hanging my controller's software when
it reads that address.  Anyway, I will be talking to Pacific Peripherals about
the software hangs, but the info on those jumpers would really help!

Thanks,

Mike

"Every man needs to believe in something....I believe I'll have another beer."

						- Norm (!)