Path: utzoo!attcan!uunet!cs.utexas.edu!samsung!usc!elroy.jpl.nasa.gov!peregrine!ccicpg!cci632!rit!ultb!vcp6840
From: vcp6840@ultb.isc.rit.edu (V.C. Povilaitis)
Newsgroups: comp.sys.amiga
Subject: Re: Star 10 printer driver
Message-ID: <2160@ultb.isc.rit.edu>
Date: 10 Feb 90 08:25:37 GMT
References: <2126@ultb.isc.rit.edu> <4175@quanta.eng.ohio-state.edu>
Reply-To: vcp6840@ultb.isc.rit.edu (V.C. Povilaitis)
Distribution: na
Organization: Information Systems and Computing @ RIT, Rochester, New York
Lines: 21

In article <4175@quanta.eng.ohio-state.edu> cjb7102@muon.eng.ohio-state.edu (Chris J. Berge) writes:
>The printer driver that comes with the Extra's disk called EpsonX, I
>think, for WB1.3 works fine.  That is the one that I use.
>-=-
>Me
>The Ohio State University Electrical Engineering Dept. 
>2015 Neil Avenue
>Columbus, OH 43210

I'm afraid not.  I have an older Star 10 printer (not a Star 10X).  The
driver (EpsonX) doesn't work with it.  It produces blank "lines" between
each graphics "line" when I try to dump graphics to it.  I need a driver
specific to that printer.  I know one exists but I don't know where to
get it.)

-Vitas P.-

-Vitas P.-    | 22 Wolcott Avenue, Rochester, NY 14606
Rochester     | vcp6840@ritvax.bitnet or vcp6840@ultb.isc.rit.edu
Institute     | ...![allegra, seismo, or rutgers]!rochester!ultb!vcp6840
of Technology | SOMETHING HAS TO WORK AROUND HERE!!!!!!!!!!!!!!!!!!!!!!