Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!ucbvax!ucsd!ucsdhub!hp-sdd!ncr-sd!ncrlnk!wright!thor.wright.edu
From: amercer@thor.wright.edu (Art Mercer)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Simple A2091-40 question...
Message-ID: <1046@thor.wright.EDU>
Date: 6 Feb 90 18:52:46 GMT
References: <3092@usceast.UUCP>
Sender: news@wright.EDU
Reply-To: amercer@thor.wright.edu
Lines: 33

From article <3092@usceast.UUCP>, by yarnall@usceast.UUCP (Ken Yarnall):
>> 
>> I guess that about says it.  I just can't remember this being mentioned.
>> Does the A2091-40 require an OFS Partition to boot from, or can you boot
>> directly from a FFS partition, as is the case with the HardFrame, etc.?

It boots directly from FFS.  So far mine has worked very well, no more
problems with DPain III hi-res overcan saves biting the hard disk....

>> 
>> Eagerly Awaiting My A2500/30,

As did I and it seems well worth the wait.  Brought the 030 board up to
4Meg (9Meg total on-board), it is quick!

>> ken
>> 
>> -- 
>> <><><><><><>
>> Ken Yarnall                             yarnall@cs.scarolina.EDU
>> Math Department, USC			yarnall@ucseast.UUCP
>> Columbia, S.C. 29205			(803)777-6686

Art Mercer
Associate Director, Academic Computing Resources
040T Library Annex
Wright State University
Col. Glenn HWY
Dayton, OH 45435

BITNET:	amercer@wsu.bitnet
Phone:	(513)873-4038
---