Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!usc!ucsd!ucbvax!hplabs!hp-sdd!briang
From: briang@hp-sdd.hp.com (Brian Gragg)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Xetec FastTrak Memory...
Message-ID: <3267@hp-sdd.hp.com>
Date: 9 Feb 90 15:11:00 GMT
References: <1990Feb9.001827.12874@cec1.wustl.edu>
Sender: news@hp-sdd.hp.com
Reply-To: briang@hpsdl36.UUCP (Brian Gragg)
Organization: Hewlett-Packard, San Diego Division
Lines: 28

In article <1990Feb9.001827.12874@cec1.wustl.edu> bdo8650@cec2.wustl.edu (Bryan Dennis O'Connor) writes:
>
>	Anyone have any information/experience with adding memory to 
>the Xetec FastTrak hard drive for the Amiga 500.  The manual is 
>cryptic and my local dealer knows nothing.     
>	
>	I know it needs some sort of 'memory board' but I have no info
>on where/how to get it...
>
>	Any help would be appreciated...
>
>	(ps.  I highly reccommend the Xetec for any A500 owner.)
>

Try calling Xetec and asking them.  They were real helpful when I asked
questions.  Their number is (913) 827-0685.  They are in Kansas.  
BTW, I get my dirve/controller with the ram installed.  It is a small board
that goes in the interface box and has 4 SIMM slots.  You can use .5, 1, or
2 Meg SIMMs I believe.  When I was looking (4 mo. ago) the ram board list
was $99.  Xetec gave me the names of some places which would sell it to me.

Brian.
	   (ps. I also highly reccommmend the Xetec for A500 owners!!)

-- 
-----------------------------------------------------------------------------
  Brian Gragg    briang@sdd.hp.com   hp-sdd!briang  uunet!ucsd!hp-sdd!briang
-----------------------------------------------------------------------------