Path: utzoo!attcan!uunet!zephyr.ens.tek.com!tektronix!percy!parsely!agora!billsey
From: billsey@agora.UUCP (Bill Seymour)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Optical Mouse Question
Keywords: MSI m4, conversion
Message-ID: <1880@agora.UUCP>
Date: 13 Feb 90 02:15:20 GMT
References: <1990Feb7.031801.443@uncecs.edu>
Reply-To: billsey@.UUCP (Bill Seymour)
Organization: Organization?  You've got to be kidding!
Lines: 21

In article <1990Feb7.031801.443@uncecs.edu: kms@uncecs.edu (Ken Steele) writes:
:I recently was given a MSI m4 optical mouse.  Can it be
:used with the Amiga?  What needs to be done?  Is there
:any easy way to test to see if it is working?

	Speaking of old Mouse Systems mice... I have an m2 serial mouse.
The circuit board inside has an empty area where the chip would go if this
were a buss mouse. It also has empty areas where a couple of pullup
resitor networks would go. And finally it has an empty area for the
ten pin connector to feed the computer. Does anyone have any idea what
I'd put in there to change this sucker to a buss mouse? I'd sure like to
use it on my Amiga! :-)

:Ken
:-- 

-- 
     -Bill Seymour             ...tektronix!reed!percival!agora!billsey
=============================================================================
Bejed, Inc.       NES, Inc.        Northwest Amiga Group    At Home Sometimes
(503) 281-8153    (503) 246-9311   (503) 656-7393 BBS       (503) 640-0842