Path: utzoo!attcan!uunet!mailrus!tut.cis.ohio-state.edu!ucsd!helios.ee.lbl.gov!nosc!crash!pro-freedom.cts.com!gsnow
From: gsnow@pro-freedom.cts.com (Gary Snow)
Newsgroups: comp.sys.apple
Subject: Re: Help! Homebrew SCSI Hard Drive on IIGS
Message-ID: <1457@crash.cts.com>
Date: 12 Feb 90 11:56:11 GMT
Sender: news@crash.cts.com
Lines: 21

In-Reply-To: message from keithl@loop.UUCP

> The drive is a 20 Meg Micropolis 1302, 830 tracks, 3 heads, 18 sectors,
> 3600 RPM, 6ms (!!) access, with an Adaptec 4000A controller.  I have
> formatted it on the Mac with Fractal Formatter or Silver Lining 5.2, either 
> works fine, on the Mac.  I am formatting with an interleave of 3, and 
> entering the bad blocks with Fractal.  Silver Lining claims to be able to 
> write a ProDos partition.

I would suggest that your interleave is too much for the GS, try a higher
number.

Gary

_______________________________________________________________________________
                                                   
    UUCP: crash!pnet01!pro-freedom!gsnow          | 
 ProLine: gsnow@pro-freedom                       | Pro-Freedom: (206)253-9389
 ARPANet: crash!pnet01!pro-freedom!gsnow@nosc.mil | Vancouver, Wa
InterNet: gsnow@pro-freedom.cts.com               | 
_______________________________________________________________________________