Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!crdgw1!zaire!rankins From: rankins@zaire.crd.ge.com (raymond r rankins) Newsgroups: comp.sys.apple Subject: Apple SSC and Parallel card questions Message-ID: <5235@crdgw1.crd.ge.com> Date: 13 Feb 90 17:07:59 GMT References: <1475@crash.cts.com> Sender: news@crdgw1.crd.ge.com Reply-To: rankins@zaire.crd.ge.com (raymond r rankins) Organization: General Electric Corp. R&D, Schenectady, NY Lines: 25 I have just gotten a couple of Apple II+'s and other hardware and included with this is an Apple Super Serial Card and an Apple Parallel interface card. My first question is, can someone tell me what the DIP switch settings need to be to have the Super Serial Card work with an Imagewriter I printer? Also, what are the poper settings to hook it up with a Hayes Compatible Modem? Secondly, can anyone give me the pinouts for a centronics cable that connects with a circa 1979 Apple Parallel printer interface. I have 2 of them, but no printer cables. I need to make a Centronics cable that will let the cards work with an Epson Printer. The interface manual shows what each line of the 20 pin connector on the card does, but what pins on a Centronics plug do I connect them to for a Epson Printer? Thanks for any help. Ray --- Ray Rankins |(518) 387-7340 (days)| INTERNET: rankins@zaire.crd.ge.com 2 Moonglow Rd. |(518) 583-3320 (eves)| COMPUSERVE: 71131,3236 Gansevoort, NY 12831| | AmericaOnline: RayRankins