Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!uakari.primate.wisc.edu!uflorida!mephisto!mcnc!kajihara
From: kajihara@mcnc.org (Lord of Sith)
Newsgroups: comp.sys.cbm
Subject: Kermit v2.2 problems
Keywords: C-128 screen driver with C-128D
Message-ID: <1624@speedy.mcnc.org>
Date: 7 Feb 90 17:18:06 GMT
Organization: MCNC; RTP, NC
Lines: 17

I have downloaded kermit v2.2 again from Q-link and can get it to work with the
C-64 80 column screen.  However, because I have an 80 column monitor and a
C-128D computer, I would like to use the C-128 screen driver.  My problem is
that in connect mode, characters like 'A' and 'D' are not echoed to the screen.
This is a system with nothing connected via the joystick ports.  Previous
replies to an earlier post suggested that this was a local echo problem; this
is not the case as echo is on.  Any help would be appreciated.

     Thanks,

     Scott Kajihara

-- 
     Scott Akira Kajihara
mcnc!kajihara  kajihara@mcnc.org  mcnc!pyvax!kajihara  mcnc!pymvjb!kajihara
kajihara@ncsuphys.BITNET _et. al._ of which I am not aware.
     Insanity is a prerequisite for physics techie-types