Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!jhunix!doug
From: doug@jhunix.HCF.JHU.EDU (Douglas W O'neal)
Newsgroups: comp.sys.dec
Subject: help needed setting up a VAXStation 3100
Summary: rom monitor errors on scsi disk
Message-ID: <4207@jhunix.HCF.JHU.EDU>
Date: 13 Feb 90 15:25:35 GMT
Reply-To: doug@jhuvms.bitnet (Douglas W. O'Neal)
Organization: The Johns Hopkins University - HCF
Lines: 15

I am trying to set up a VAXStation 3100 for a department here and am having
trouble getting it to recognize the scsi disk.  The station and the TK50 came
from DEC and I have no problems recognizing the tape drive when it is the only
external device.  However, when I daisy-chain the disk (an ANDATACO 663MB scsi
disk), neither devices show up in a show device command.  When I take off the
TK50 and do a show device, I get back that there is a 663MB disk at address
1 on scsib.  I then do a test 6 (test on scsib) and get a return error code
of 84 = "internal request not set following bus free".

Has anybody seen/fixed this problem before?  Does anyone have this configuration
working?  Thanks in advance.
-- 
Doug O'Neal                  Distributed Systems Programmer
Homewood Academic Computing  doug@jhuvms.bitnet, doug@jhuvms.hcf.jhu.edu
Johns Hopkins University     mimsy!aplcen!jhunix!doug