Path: utzoo!attcan!uunet!mailrus!tut.cis.ohio-state.edu!usenet.ins.cwru.edu!mephisto!ncar!asuvax!mcdphx!mcdchg!ddsw1!ddsw1!vpnet!akcs.amparsonjr
From: akcs.amparsonjr@vpnet.UUCP (Anthony M. Parson, Jr.)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Hauppauge '386 motherboard upgrade. Any info?
Message-ID: <25cb334c:4554.5comp.sys.ibm.pc;1@vpnet.UUCP>
Date: 4 Feb 90 01:00:09 GMT
References: <8973@amherst.bitnet> <441@sixhub.UUCP>
Lines: 21

I've only played with 1 386 motherboard (AMI) and a clone case.  I am very
satisfied with the fit and form of the motherboard in the case (which also
had all the correct plastic standoffs, etc.  The AMI manual clearly indictes
which holes are to be used with screws, for grounding purposed, and those
also lined up accurately.  I'd definitely get a second AMI board if I
needed one, but one 386 in the home is enough...

Standard disclaimers apply, I'm only a customer.  However, I am available
for product endorsements of most kinds: computers, sports equipment, paper
products, etc.  I figure if Ed McMahon can get away with it, so can I

  ----------------------------------------
  |          STANDARD DISCLAIMER:        |   
  |  "... on the other hand, some very   |   UUCP: akcs.amparsonjr@vpnet.uucp
  |  knowledgable people may justifiably |   
  |  disagree with my comments, in whole |   C-serve: 73336,1667
  |  or in part ... "                    |
  ----------------------------------------