Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!deimos!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!mms00786
From: mms00786@uxa.cso.uiuc.edu
Newsgroups: comp.sys.ibm.pc
Subject: Re: Orphaned Response
Message-ID: <111700199@uxa.cso.uiuc.edu>
Date: 9 Feb 90 12:18:53 GMT
References: <5546@hydra.gatech.EDU>
Lines: 16
Nf-ID: #R:hydra.gatech.EDU:5546:uxa.cso.uiuc.edu:111700199:000:587
Nf-From: uxa.cso.uiuc.edu!mms00786    Feb  8 11:59:00 1990


Two ways we do it:
a) print, from PC Word, to a postscript file. Then copy this file to 3.5 inch,
   take it over to a Mac with FDHD, and use AppleFile Share to convert the IBM
   postscript file to a regular document. Then use a program called the Font
   Downloader to download the postscript file to the laserwriter.

b) Do the above file transfer using Mac and PC Kermits and a $6.00 RS232 cable.

c) Bring the postscript file into Microsoft word, select all the text, and set
   the style to postscript (Don't ask me how, its in the manual). Then print.

Hope this helps.

Milan
.