Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!amdahl!twg.com!obelix.twg.com!lefty
From: lefty@obelix.twg.com (David N. Schlesinger)
Newsgroups: comp.sys.mac
Subject: Re: System Error = 03
Message-ID: <136@gollum.twg.com>
Date: 8 Feb 90 17:48:26 GMT
Sender: news@twg.com
Distribution: usa
Organization: The Wollongong Group
Lines: 25
References:<1990Feb4.224159.26586@athena.mit.edu> <2820@cunixc.cc.columbia.edu>

In article <2820@cunixc.cc.columbia.edu> cmm1@cunixa.cc.columbia.edu 
(Christopher M Mauritz) writes:
> I keep getting System Error #03 and a crash when I try to print from 
> MacDraw II from time to time.  I am running under system 6.0.3 and I'm 
> not using Multifinder.

System error 3 indicates that the processor has attempted to execute an 
illegal instruction.

Not that this helps you much, I'm sure...

Speculation: possible incompatibility between the IIcx/6.0.3 and 
E-Machines' code for the monitor?

Good luck,

Lefty


===========================================================================
          David N. Schlesinger   || "There's a word for it: words don't
          The Wollongong Group   ||  mean a thing.  There's a name for it;
Internet: Lefty@twg.com          ||  names make all the difference in the
POTS:     415/962-7219           ||  world..." -- David Byrne
===========================================================================