Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!brutus.cs.uiuc.edu!jarthur!elroy.jpl.nasa.gov!grian!alex
From: alex@grian.cps.altadena.ca.us (Alex Pournelle)
Newsgroups: comp.sys.mac.hardware
Subject: Re^2: What to cut?
Message-ID: <1990Feb7.075422.22318@grian.cps.altadena.ca.us>
Date: 7 Feb 90 07:54:22 GMT
References: <1990Feb6.113438.11827@grian.cps.altadena.ca.us> <6090@umd5.umd.edu>
Organization: Workman & Associates
Lines: 19

steveg@umd5.umd.edu (Steve Green) writes:

>In article <1990Feb6.113438.11827@grian.cps.altadena.ca.us> alex@grian.cps.altadena.ca.us (Alex Pournelle) writes:
>]OK, now that I have my internal Mac Plus disk drive back--and have lost
>]the connector cable--somebody please tell me which lines to cut on an SE
>]ribbon so I can use it instead!

>Counting the wires on the ribbon cable, start with the end that has the colored
>stripe on it and call that wire #1.  Then cut #9 and #20.
>If you are not sure what end to start with, look on the connectors for a
>small arrow.  That should signify pin #1. 

Thanks, much!  I appreciate!

(And for the rest of you guys--if it's "red", it's a SE cable; "yellow"
is a Plus cable.  That's the pin-one edge color.)

	Alex