Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!psuvax1!psuvm!psuecl!pml
From: pml@psuecl.bitnet
Newsgroups: comp.sys.mac.hardware
Subject: Re: HELP! Checkerboard pattern on SE screen (no desktop)012
Message-ID: <85481@psuecl.bitnet>
Date: 11 Feb 90 15:31:30 GMT
References: <85343@psuecl.bitnet>
Organization: Engineering Computer Lab, Pennsylvania State University
Lines: 6


     Well, I figured out my own problem.  I was using old instructions that
I had got from a friend that pre-dated Mac-SE where you have to remove a
jumper, not cut the R35 resistor.  I resoldered the resistor, took out the
jumper, and put the 1 Meg SIMMs in slots 3 and four (256Ks in slots 1 and
2).  Now everything works perfectly.  Boy, I feel stupid.
                                             Pete