Path: utzoo!attcan!uunet!nitrex!rbl
From: rbl@nitrex.UUCP ( Dr. Robin Lake )
Newsgroups: comp.sys.mac.hardware
Subject: Re: Parallel Interface Schermmactic Wanted
Keywords: Mac, 128K,printer
Message-ID: <385@nitrex.UUCP>
Date: 12 Feb 90 16:47:57 GMT
References: <4026@quanta.eng.ohio-state.edu>
Reply-To: rbl@nitrex.UUCP (Robin Lake)
Distribution: na
Organization: BP Research International - Research Center Warrensville,  Cleveland, OH
Lines: 22

In article <4026@quanta.eng.ohio-state.edu> rlong@phonon.eng.ohio-state.edu (Prof. Ronald Long) writes:
|>I would like to find a schematic for a serial to parallel
|>printer interface which was sold for the early Macs. It is
|>called the Granny Smith Connection and was made by
|>Z.A.P. Logic Corporation. The company which is now out of
|>business was located in Canada (Toronto I think). They
|>filed the part numbers off of the IC's (Grrr!).
|>
|>Can anybody help?
|>
|>-=-
|>Ronald K. Long, Ph.D.
|>Ohio State Univ EE Dept., 2015 Neil Ave., Columbus, OH 43210
|>rlong@phonon.eng.ohio-state.edu


I just bought a Grappler Nine-Pin adapter that goes from Mac serial to
Centronics-compatable parallel for about $70.  It might be a solution
to your problem if your time is worth anything.....

Rob Lake
uunet!nitrex!rbl