Xref: utzoo comp.unix.xenix:9972 comp.unix.i386:2860 Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!mips!apple!sun-barr!newstop!texsun!smunews!attctc!mjbtn!root From: root@mjbtn.MFEE.TN.US (Mark J. Bailey) Newsgroups: comp.unix.xenix,comp.unix.i386 Subject: CompuAdd 386-25 and SCO Xenix/Unix Keywords: Are there any known problems to consider? Message-ID: <544@mjbtn.MFEE.TN.US> Date: 9 Feb 90 16:09:26 GMT Organization: JobSoft Design & Development, Murfreesboro, TN Lines: 29 Hi, Recently, I transferred my SCO Xenix 2.3.3 OS from my Tandy 4000 over to my CompuAdd 386/25 machine I got last summer. The CompuAdd model is one of the "older" models before they started marketing their current line. For the most part, it functions with a hitch under Xenix. However, I have noted that the Archive 60meg tape drive will get in a "loop" when doing a backup from our database system (written in Unify 4.0) which uses /dev/rct0 directly. It worked fine on our Tandy 4000 time after time, so an initial starting point is the CompuAdd. Any ideas? Along that line, are there any other things anyone out there has either heard or experienced about using CompuAdd's 386/25 and SCO that I should be aware of. At this point, I have heard of *no* problems, so any piece of information would be advantageous. I appreciate any and all responses. Thanks in advance! Mark. -- Mark J. Bailey, N4XHX "Ya'll com bak naw, ya hear!" USMAIL: 511 Memorial Blvd., Murfreesboro, TN 37129 ___________________________ VOICE: +1 615 893 0098 | JobSoft UUCP: ...!{ames,mit-eddie}!attctc!mjbtn!mjb | Design & Development Co. DOMAIN: mjb@mjbtn.MFEE.TN.US CIS: 76314,160 | Murfreesboro, TN USA