Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!cs.utexas.edu!lgc.com!lgc!max From: max@lgc.lgc.com (Max Heffler @ Landmark Graphics) Newsgroups: comp.unix.i386 Subject: getty problems with x5 update and telebit trailblazer Keywords: set up per documentation by no inbound success. (HELP) Message-ID: <208@lgc.lgc.com> Date: 11 Feb 90 05:32:51 GMT Sender: usenet@lgc.com Lines: 46 I have successfully used the acu1 port for outbound traffic from my Telebit on a Compaq 386/25 running 386/ix 2.0.2 with the x5 update. I have not been successful with the getty on ttyd1. When I set it up per the documentation, the modem will answer, but ps -ef shows getty still running but no login prompt is offered, and the caller appears hung. My /etc/conf/init.d/asy is: # Telebit Trailblazer on ttyd1 01:2345:respawn:/etc/getty -t 60 ttyd1 TB8-19200 I performed idmkinit and tested it successfully using telinit q My Dialers has: tbfast =W-, "" A\pA\pA\pA\pA\pT OK ATx3s0=0s64=1s50=255DT\T FAST-\c-FAST tbinit =W-, "" A\pA\pA\pA\pA\pT OK ATs51=254 OK My Devices has: ACU acu1 - 9600 tbfast \T ACU acu1 - 19200 tbfast \T ACU tbinit - 19200 tbinit \T and I successfully dial on on acu1, including cu and uucp. My gettydefs has: TB8-19200# B19200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO EC HOE ECHOK ICANON ISIG CS8 CREAD # B19200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IX ON IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD #login: #TB8-2400 TB8-2400# B2400 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO ECHO E ECHOK ICANON ISIG CS8 CREAD # B2400 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD #login: #TB8-1200 TB8-1200# B1200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO ECHO E ECHOK ICANON ISIG CS8 CREAD # B1200 HUPCL OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD #login: #TB8-19200 Does anybody have any clues as to why the getty does not give a login prompt and or what methods are there for testing further the operation on the Compaq when the login prompt is not produced? Help... Thanx in advance -- Max Heffler internet: max@lgc.com Landmark Graphics Corp. uucp: ..!uunet!lgc!max 333 Cypress Run, Suite 100 phone: (713) 579-4751 Houston, Texas 77094