Path: utzoo!attcan!uunet!cs.utexas.edu!rutgers!cbmvax!vu-vlsi!jerimy!brian
From: brian@jerimy.UUCP (Brian T. Riley)
Newsgroups: unix-pc.general
Subject: Re: request for info on OBM commands
Keywords: OBM, commands, tone
Message-ID: <168@jerimy.UUCP>
Date: 11 Feb 90 08:56:30 GMT
References: <4715@rtech.rtech.com>
Reply-To: brian@jerimy.UUCP (Root)
Distribution: na
Organization: Technical Associates
Lines: 19

In article <4715@rtech.rtech.com> bruces@daneel.rtech.com (Bruce Stewart) writes:
>I'd like to set my OBM to dial tone instead of pulse; I'm not using the 
>phone manager, and so my OBM dials out in pulse by default.  I'd like the 
>analogous commands to ATDT for the OBM, so I can modify my uucp entries to 
>use tone dialing.  Any help gratefully accepted. 
>
>ADVTHANKSANCE.
>
>-bruce stewart

Bruce,
	Go to Administration/Hardware/Telephone and look for lines that ask;

	Is Line # a Touch Tone line?

	and answer yes. This will make tone dialing the default.

	Hope this helps. :^}

Brian T. Riley                         UUNET:  brian@jerimy.UUCP
                                       GEnie:  BT.RILEY

To err is human, but, to really screw up requires the root password!