Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!usc!sdsu!crash!pro-party.cts.com!seanc
From: seanc@pro-party.cts.com (Sean Cunningham)
Newsgroups: comp.sys.amiga
Subject: Re: Video Transputer
Message-ID: <1484@crash.cts.com>
Date: 14 Feb 90 03:16:34 GMT
Sender: root@crash.cts.com
Lines: 13

In-Reply-To: message from wizard@sosaria.UUCP

The Mimetics FrameBuffer retails for about $750 w/FrameCapture chipset
installed (you'll need to install 1MEG on the board as well)...it has BNC
video input and output...no RGB.  If you're going out to a good TV/Moniter,
the pictures look nice, although the colors are a little *BRIGHT*.  The VD-1
is similar to this one, but is an external box that plugs into your parallel
port...it retails for about $1000.
 
If you plan on using one of these, make sure you have atleast 2MB, and a
program that can generate 21-24bit pictures (Scupt, TSilver, D-View, etc.)
 
Sean