Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!NUSVM.BITNET!SOMCYC
From: SOMCYC@NUSVM.BITNET (Chiang Yao Chye)
Newsgroups: comp.sys.apple
Subject: Re: Postscript File generation on a GS
Message-ID: <9002151340.AA06226@apple.com>
Date: 15 Feb 90 13:46:10 GMT
References: <m2c!wpi!spinner@HUSC6.HARVARD.EDU>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 13
X-Unparsable-Date: Thu, 15 Feb 90 21:34:50 SST


To generate a PostScript file from a GS application, the following steps
are necessary.

1.  Make a copy of the LaserWriter driver file in the Drivers directory,
and rename it PostScript or something like that.

2.  Go to the Control Panel NDA, select PostScript as the printer.

3.  When at the Print dialog box, *immediately* after pressing return press
Open-Apple F.  You should see a message saying 'Generating PostScript file...'

In this way, there's no need to enable AppleTalk.