Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!mips!apple!dlyons
From: dlyons@Apple.COM (David A. Lyons)
Newsgroups: comp.sys.apple
Subject: Re: AppleWorks, TextTime CDA
Message-ID: <38798@apple.Apple.COM>
Date: 20 Feb 90 06:42:03 GMT
References: <1990Feb20.061336.24967@agate.berkeley.edu>
Organization: Apple Computer Inc, Cupertino, CA
Lines: 22

In article <1990Feb20.061336.24967@agate.berkeley.edu> cshum@tornado.Berkeley.EDU (Chung H. Shum) writes:
>I would like to know if there is any way to make AppleWorks execute another SYS
>file when I exit the program.  I found a MLI quit call in the SEG.AW file that
>lives at $4924 on my system, but it doesn't seem to point to a valid quit call
>parameter table.

The parameter table you found is probably the right one--consider that the
code you found may be moved somewhere else before it actually gets executed.

>[...]  Changing around the bytes in the parm table I found (like making the
>second byte $EE) did nothing, so I suppose I'm not in the right place.

Remember that the enhanced QUIT call under ProDOS 8 is implemented only for
the GS, when GS/OS has been booted.
-- 
David A. Lyons, Apple Computer, Inc.      |   DAL Systems
Apple II Developer Technical Support      |   P.O. Box 875
America Online: Dave Lyons                |   Cupertino, CA 95015-0875
GEnie: D.LYONS2 or DAVE.LYONS         CompuServe: 72177,3233
Internet/BITNET:  dlyons@apple.com    UUCP:  ...!ames!apple!dlyons
   
My opinions are my own, not Apple's.