Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!jarthur!spectre.ccsf.caltech.edu!tybalt.caltech.edu!madler
From: madler@tybalt.caltech.edu (Mark Adler)
Newsgroups: comp.sys.handhelds
Subject: Re: HPREAD
Summary: Using with an IBM Game Port
Message-ID: <1990Feb16.221715.19472@spectre.ccsf.caltech.edu>
Date: 16 Feb 90 22:17:15 GMT
References: <1141@mindlink.UUCP>
Sender: news@spectre.ccsf.caltech.edu
Organization: California Institute of Technology, Pasadena
Lines: 15


Using HPREAD with an IBM PC game port: connect the detector output to
pin 2, power to pin 1, and ground to pin 4, all on the game port's DB-15
connector.  Then use port 201 and mask 10, so the command looks like:

     hpread 201 10 /options >outfile

where options are hpread command options (use "hpread /h" to see them)
and outfile is the name of the output file.

I would appreciate it if anyone who tries this lets me know how it goes.
Thanks.

Mark Adler
madler@hamlet.caltech.edu