Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!uwm.edu!lll-winken!csustan!news
From: jb@altair.uucp (John Birchfield)
Newsgroups: comp.sys.ibm.pc
Subject: Re: HELP! with Bitstreeeeeeeeeeeeam fonts with WP5.0 & Novell
Message-ID: <1990Feb15.212816.12228@csustan.CSUStan.Edu>
Date: 15 Feb 90 21:28:16 GMT
References: <1990Feb9.135440.26011@cs.dal.ca> <25d30a4c.d4e@polyslo.CalPoly.EDU> <11641@ucsd.Edu> <15817@orstcs.CS.ORST.EDU> <22085@pasteur.Berkeley.EDU> <15833@orstcs.CS.ORST.EDU> <6599@uhccux.uhcc.hawaii.edu>
Reply-To: jb@altair.csustan.edu (John Birchfield)
Distribution: usa
Organization: CSU Stanislaus
Lines: 24

In article <6599@uhccux.uhcc.hawaii.edu> cs471s07@uhccux.UUCP (Cs471s07) writes:
>
>We are trying to print fonted text from WordPerfect. Everything works
>fine if we print to the laser printer and it is attached to the workstation
>we print from. However, when we attach the printer to the server and set 
>WordPerfect to print to the Network printer p0, it loses all it's Bitstream
>fonting information.  Can someone help?
...

I forget exactly the names of the programs on Novell but pconfig seems to
ring a bell.

Basically you need to set up a print server queue that doesn't do any
printer initialization or send out banners or anything like that.

Then specify this queue in the capture command you use with WP.

These are only clues - I'm sure someone more knowledgeable with Novell can
tell you better what to do.

+----------------------
| John Birchfield      
| jb@altair.csustan.edu
+----------------------